Straight & Cut Wire
All Categories
Major galvanizers prefer our wire. We offer Super Soft tensile so you can use the added strength without tying issues.
- Consistency - Due to our fully annealed process, there will not be any "hot spots" or brittle pieces of wire that cause tie breaks and parts lost in the kettle.
- We will cut the wire to the length needed in order to ensure waste reduction (example: using 48" rather than a pre-cut 44" could be costing you more than 10% in wire usage).
Item # |
Gauge |
Diameter |
Coil Break Range |
Tensile Strength |
Length |
---|---|---|---|---|---|
BSAC 9G X 72" | Gauge N/A 9 Ga | Diameter N/A 0.144 in | Coil Break Range N/A 814 to 977 | Tensile Strength N/A 50,000 - 60,000 psi | Length N/A 72 in |
BSAC 9G X 84" | Gauge N/A 9 Ga | Diameter N/A 0.144 in | Coil Break Range N/A 814 to 977 | Tensile Strength N/A 50,000 - 60,000 psi | Length N/A 84 in |
BSAC 9G X 96" | Gauge N/A 9 Ga | Diameter N/A 0.144 in | Coil Break Range N/A 814 to 977 | Tensile Strength N/A 50,000 - 60,000 psi | Length N/A 96 in |
BSAC 9G X 108" | Gauge N/A 9 Ga | Diameter N/A 0.144 in | Coil Break Range N/A 814 to 977 | Tensile Strength N/A 50,000 - 60,000 psi | Length N/A 108 in |